Dieseltester

Diesel injection pump test bench 12PSB-C

Diesel injection pump test bench computerised type, for testing all kinds of diesel fuel injections pumps, mechnical pumps, same function as Bosch EPS619

Diesel injection pump test bench 12PSB-C 

diesel test bench, bosch fuel injection pump test bench

1.Characteristics(Computerised)

1. Changes frequency rate and changes rotate rate of the diesel injection pump ;

2. Small fall of rotation speed and large output torque;

3. High measurement precision of the diesel injection volume

4. The functions of overvoltage,overload and short circuit protection

5. Ten types of  rotate rate preseting for different diesel pumps;

6. Temperature kept constantly

7. The diesel injection pump tester with very low noise

8. Operating position:arbitrary side of the two work sides of the test bench;

9. Rotation speed,cout,temperature,air pressure are display on 15”LCD

10. .Built-in air resource

Bosch EPS619 diesel pump tester  diesel test bench, bosch fuel injection pump test bench

2. Function

1. Measures the cylinder’s fuel volume at different rotate rate

2. Checks  the cylinder’s pulse at static status

3. Inspects the mechnical speed drive of the diesel injection pump

4. Inspect the electricmagnetic valve of distribution pumps;

5. Inspects the gasdynamic speed governors' working  status;

6. Checking of the pressure compensators(LDA)

7. Measurement of the reflux delivery of distributor pumps;

8. Measurement of the internal pressure of the distributor pumps body;

9. Measurement of rack travel(option).

10. Measurement of advance angle(option).

12. Checking of diesel injection pump's internal seals.

diesel test bench, bosch fuel injection pump test bench  diesel injection pump test bench Bosch EPS619   diesel test bench, bosch fuel injection pump test bench  diesel test bench, used bosch fuel injection pump test bench

3. Technical Parameters  

1. Rotation rate :0~4000RPM

2. Two types test tubes:45cc, 150cc.

3. Capactiry of fuel tank:60L

4. Temperature rane: 40±2℃

5. Test oil filtering unit: 5μ

6. Test bench D.C.Supply:12V/24V

7. Feed pressure:low: 0~0.4MPa,high: 0~4Mpa

8. Air pressure: +0~0.3MPa, -0.03~0Mpa

9. 3-phase power voltage:380V/220v or on request

10. Flywheel inertia: 0.8KG·M2

11. Center height of the diesel injection pump test bench:125MM

12. Standard power: 7.5KW,11KW、15KW or on request

13. Overall dimensions(MM): 2360×960×1870 or on request

14. Net weight(KG):about 1300